Walrus Audio Canvas: Line Isolator/D. The Canvas Mono is a Direct Box/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon.From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music. Your sound is the paint, and this is your canvas.
Canvas Mono is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an acoustic or bass guitar direct, then the Canvas Mono is your new bridge to the front-of-house. The Canvas Mono packs everything you need from a DI/LI into a standard pedal-sized enclosure designed to look great right on top of your board. Use DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output.
Use the gain on your mixer or preamp to bring the signal up to line level. Use LI mode when connecting your unbalanced, low impedance source Amp + Cab Sim like the ACS1, keys, etc. The signal will remain full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.Flat frequency response from 20Hz-20kHz. Converts ¼ unbalanced input to XLR balanced output.
Sum switch turns the Thru channel into a second input when engaged, allowing stereo input signals to be summed to the XLR output. Pad: Enables a -15dB input pad Only in D. Mode for reducing hot signals in order to minimize distortion.
Choose between DI or LI (Out for DI, In for LI). GND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.
Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response. The Canvas comes in a lightly textured matte black enclosure with blue, light green, yellow, orange, red and white ink displaying your painter's palette to begin creating your sonic brush strokes. The die-cast enclosure's exact size is 4.77" x 2.6" x 1.39.
We are authorized dealers for all these brands. We operate a 30-day return period. A 10% re-stock is more likely if the unit comes back in mint condition.
Also, Items which we do not normally stock i. "Special Orders", discontinued products, close-outs, used products, etc. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Multi-Effects". The seller is "proaudiostar" and is located in this country: US.This item can be shipped to United States.